The Twin Towers

The Twin Towers
Gallery of Evidence

Click to view construction photos of the World Trade Center.

AE911Truth.org info card front:
The Case for Explosive Demolition of the WTC Towers

AE911Truth.org info card back:
The Case for Explosive Demolition of the WTC Towers

Fire has never done this to steel. But a thermite incendiary cutter charge does. The byproduct of thermite is molten iron. The byproduct of thousands of thermite cutter charges is tons of molten iron — as witnessed by numerous NYFD personnel and the WTC Structural Engineer, Leslie Robertson.

--> "Many fireman know there were bombs in the building but they are afraid for their jobs to admit it because the higher-ups forbid discussion of this fact."

Paul Isaac, FDNY

-->

No steel framed high-rise building has ever collapsed due to fire - due to the high temperatures that would be required to weaken structural steel past it's critical safety margin - even though very large, very hot, and very long-lasting fires have ravaged many steel-structure high-rise buildings. These buildings are all in use today:

• Caracas, Venezuela, Oct, 2004, 56 story building,
burned for 17 hours over 26 floors
• Los Angeles, May 1988, 1st Interstate Bank, 62 stories,
burned for 3.5 hours over 5 floors
• Philadelphia, Feb, 1991, Meridian Plaza, 38 stories,
burned for 18 hours over 8 floors
• New York, Aug, 1970, New York Plaza, 50 stories,
burned for six hours

Previously molten metal was found "flowing like lava" by the FDNY in the basements of all 3 WTC High-rises. Hydrocarbon fires can burn at a maximum temperature of 1,800°F which is about 1,000° short of the beginning melting temperature of steel. Where did the molten metal come from? Why do FEMA and NIST deny its existence?

The 4- to 20-ton steel columns & beams were broken apart at bolted and welded connections and ejected laterally up to 500 feet.

The architectural drawings of the WTC North Tower have been leaked from an individual associated with the Silverstein-Weidlinger Report. They reveal that the large box columns of the core maintain their 30"x16" and 52"x22" dimensions at least up through the 66th floor. They also indicate that most of the core columns would be easily accessed from the elevator shafts in order to plant explosives. We know that the elevators were being modernized by Ace Elevator during the 9 months prior to 9/11.

This is the World Trade Center exploding.

This is an acknowledged explosion.
Can you tell the difference?

Which 20 story building will fall to the ground first? Until 9/11/01 most physicists would have agreed that the one that didn't have to crush though 100,000 tons of steel would fall first — at free-fall speed. On 9/11, the example on the left "collapsed" at virtually free-fall speed! But this could only have been accomplished by removing the columns ahead of the fall — with explosives.

Numerous Squibs (mis-timed explosions) can be seen seen 20 to 40 floors ahead of the advancing "collapse". NIST claims that they are "puffs of air" created from the pancaking floors above. But there are no pancaking floors above, they are not air but pulverized building materials, they occur precisely at the center of the building in an "open office plan", and finally, the 160 to 200 feet per second speed of this debris suggests they could only have been propelled by explosives.

The debris was equally distributed across a 1,400 ft. diameter. There are no "pancakes" stacked up at the bottom of either tower!

The FEMA report notes:
"The results of the examination are striking. They reveal a phenomenon never before observed in building fires: eutectic reactions, which caused "intergranular melting capable of turning a solid steel girder into Swiss cheese.... Evidence of a severe high temperature corrosion attack on the steel, including oxidation and sulfidation." NIST dropped this like a hot potato. These are all tell tell signs of the use of thermate (sulphur + thermite) incendiary cutter charges."

It takes thousands of degrees to bend steel like this without buckling. Thermate cutter charges create over 4,500°F. Fires — even with jet fuel — create only 1,700°F maximum.

Physics professor Steven Jones finds, in this previously molten sample from the WTC, the chemical traces of Thermate — including Fluorine, Manganese, Sulphur, Potassium, etc.

Steven Jones, PhD physicist discovers previously molten iron spheres in the WTC dust which blanketed lower Manhattan. Sizes are up to 1/16" diameter. The findings are corroborated by EPA but not explained. Molten iron is the byproduct of Thermite. It contains the chemical signature of thermate.

The Smoking Gun: Microspheres carry signature of Thermate!

The concrete and other building contents were pulverized to a thick ground hugging pyroclastic dust — much of which was <100>

This is all that is left of the concrete floors, gypsum wall board, steel decking, office furniture, office machinery, filing cabinets. The toxic dust averages 4" deep — throughout lower Manhattan.

Controlled demolitions can be performed in a variety of ways.
Above are two examples of top-down controlled demolition.

Why didn't we see the truth about about 9/11 before?
Did the 9/11 Commission keep the true cause of the "collapses" under wraps?
Did FEMA and NIST lie in their reports?
Is the mainstream media controlled enough to manipulate this story from the very beginning?
WE WILL ONLY KNOW IF WE GET A NEW TRULY INDEPENDENT INVESTIGATION!

Videos

In addition to the FDNY witnessing the molten metal, Leslie Robertson, the structural engineer of the WTC noted: "As of 21 days after the attack, the fires were still burning and molten steel was still running," at the National Conference of Structural Engineers on October 5, 2001.

Read »